Even the most reliable plumbing fixture can break. Especially unpleasant if this product is used daily by all family members. If the fittings of the toilet flush cistern have failed, then you don’t want to wait a couple of days until the plumber comes, do you agree? Moreover, such a problem can be successfully solved on their own.
Before proceeding with the repair, it is necessary to understand the design of the tank, the device of the drain mechanism and understand the principle of operation of the spillway. The article discusses in detail all of these points, as well as describes possible breakdowns of the toilet fittings and how to eliminate them.
Toilet bowl: what's inside?
The toilet is central to any bathroom. If you can do without a shower cubicle or bathtub using a washing tray, then the toilet bowl is an indispensable device not only for every family member, but even for some pets.
Therefore, it is simply necessary to know its features and device so that on Saturday morning you will not be alone with such a breakdown.
You can repair or replace the tank fittings with your own hands. The main thing is to shut off the water before starting work and get acquainted with the manufacturer's recommendations for structural adjustment
Features of the drain tanks
Tanks for toilets differ in the material of manufacture, the method of installation and connection to the water supply, the type of location of the button / lever. And the price range of this type of plumbing fixtures is very wide - from inexpensive domestic models to exclusive design options by eminent manufacturers of sanitary ware.
According to the material of manufacture, the following types of tanks for the toilet are distinguished:
- earthenware;
- plastic;
- cast iron.
Spillway fittings used for toilets are mainly made of plastic. This applies even to expensive models.
Only in exclusive versions of plumbing use metal fittings. Moreover, it is made of brass and bronze alloys
Earthenware Tanks have gained recognition and are most widespread throughout the world. It is this material that can most often be found in bathrooms, where a pair of toilet bowl + tank is installed.
Earthenware products are produced by both domestic manufacturers and eminent western firms. Choose the best option for your bathroom is not difficult
Plastic models drain tanks are flattened. This is due to the specifics of their use - the so-called hanging toilet bowls, when the flushing device is installed in the wall. The design is reliable, easy to maintain and has a long service life.
Plastic tanks for toilets after installation must have an inspection window. It is usually located behind the flush button
Cast Iron Tanks - This is a relic of the past. Heavy, bulky and unpresentable constructions still remain in use by many zealous residents of our country. But during the repair, often the old cast-iron products are replaced with beautiful modern plumbing.
According to the method of connecting to the water supply, there are toilet tanks with top and bottom connections. The second ones are more preferable - they look more presentable and create less noise during work.
The option with the top eyeliner is produced by many Russian plumbing companies. To reduce the noise during the collection of containers after draining, the fittings were improved.
There are three ways to install a drain tank:
- top mount;
- installation in a false wall;
- on the shelf of the toilet.
Top mount - This is a retro option. This arrangement of the drain device is used in the bathrooms, made in retro style.
Retro-style toilet cisterns are very popular among large bathroom owners. In a modest bathroom, such a product would be inappropriate, and its price is very high
Toilet installation used for hanging models when the tank is hiding in the wall. This allows you to save space in the bathroom and harmoniously fit plumbing into the overall style of the bathroom / toilet.
The tanks built into the installation, hidden by a false wall, are distinguished by a higher price compared to inexpensive domestic earthenware fixtures
Toilet shelf mounting - a traditional solution. These are the usual models of a plumbing pair, when the drain system is mounted on the shelf of the toilet bowl.
Advantages: simplicity and affordability. And the choice is very wide - you can choose both the domestic version and the elite sanitary ware of Italian, French or German manufacturers.
A flush tank on the toilet shelf is the most convenient option to maintain. If there is a need for repair, then getting to the fittings is easy
The internal structure of the tank
Inside each drain tank there is a stop valve to control the operation of the toilet. For many models, fittings come complete with all the necessary fasteners and nuts.
By the method of water supply and the installation location in the tank, these types of fittings are distinguished:
- top eyeliner;
- lower eyeliner;
- universal.
Top eyeliner design integrates into the collection tank. A flexible water supply pipe is attached from above. This must be taken into account, because such fittings are not suitable for every model of the drain tank. Basically, only domestic manufacturers provide overhead in their plumbing products.
Armature with bottom eyeliner comes complete with most Western-style drain tanks. Moreover, the design is plastic, but the quality of all components is high.
When it is necessary to replace a separate part or all fittings with a bottom water connection, it is better to buy a more expensive design of foreign companies. She will last longer (+)
Universal fittings The toilet flush tank is convenient in that it can be placed in a container with a lower or upper water supply. As needed, a special plug is put on the second hole, which is included in the kit.
By the type of material from which the reinforcement is made, they distinguish:
- plastic constructions;
- metal alloy bronze or brass.
Most models are equipped with plastic fittings. Moreover, in the case of wear of individual parts, you can always purchase the necessary plumbing in the store. If it is not necessary, then you can buy a new design.
Metal fittings are more expensive than plastic analogues. They are made from corrosion resistant alloys.
The drain tank fitting consists of 3 main components:
- filling in;
- drain;
- overfill protection.
Filling out - a node that provides filling the tank with water flowing through a flexible pipe. In the design of the valve there is a special valve that blocks the access of water at the right time. Its work is provided by a float, which is made of polystyrene or other lightweight material.
Drain. The main part of this assembly is the drain hole valve. It is driven by thrust at the moment the user presses the button / lever.
Overflow protection or overflow. The main element of this safety device for the drain tank fittings is a plastic tube that is empty inside. It is installed vertically in the tank.
The fittings for the toilet flush capacity are similar for all manufacturers. The difference in the quality of plastic and, accordingly, the cost of the kit (+)
The principle of operation of the spillway device
The toilet tank spillway device is put into operation by the user acting on the external valve mechanism. Moreover, depending on the principle of the mechanism, the design itself will differ.
Features of the drain function of the tank
Among the work items used to activate the flush function are:
- button;
- lever arm;
- pedal.
The most common option is a button. Moreover, there are models of fittings with one or 2 different buttons - for the release of small and large volumes of working fluid. 2 versions of flushing can save not only the planet’s water resource, but also reduce the monthly payment for water supply.
Buttons are most often used in the built-in models of drain devices and in compact faience products
When a button or lever is acted upon, a thrust is formed which opens the drain valve. Water from a 10-12 liter tank rushes down into the toilet bowl, cleaning it and washing away everything that was in it before.
The lever to control the flush can be very skillfully executed and stylized in metal. For example, bronze, steel and others
How does filling happen?
Simultaneously with the emptying of the tank, the float is lowered, which leads to the opening of the valve, which blocked the water supply from the water supply system. Water gradually fills the tank and as soon as the float is at a certain level set by the user earlier, the float rod will completely shut off the water supply to the toilet flush tank.
Models of tanks with pneumatic drive are still found in everyday life. Especially such a flushing mechanism is convenient for people with disabilities and children
How does overflow protection work?
When a malfunction occurs during the supply of the working fluid or one of the valve mechanisms fails, a safety device is activated - overflow. This is an empty pipe connecting to the drain valve.
The principle of its operation is simple - as soon as the water level in the tank becomes higher than the permissible, water will begin to overflow into this pipe and flow into the toilet bowl.
The height of the upper bell of the overflow pipe is 1-1.5 cm greater than the level of water in the tank set by the user
Problems with toilet seat fittings
A high-quality toilet bowl + flush tank kit from a manufacturer with a good reputation can last about 20 years. But the spillway fittings, even the most reliable, will fail earlier. Therefore, it is important even at the initial stage to identify and eliminate the occurring breakdowns.
Most often, you may encounter such problems:
- filling does not occur;
- water constantly flows into the toilet bowl;
- lack of reaction when pressing the button / lever;
- leaks at joints;
- weak discharge head.
Problem number 1. Filling does not occur if the inlet membrane is severely clogged. Then without its cleaning or replacement can not do. If the state of the membrane is working, and the tank does not fill with working fluid, then you need to check the correct functioning of the float. It may be necessary to adjust or replace the float.
In the built-in models, the inspection, adjustment and repair of fittings passes through the inspection hole, hidden behind a decorative panel with a button
Problem number 2. Water constantly flows into the toilet, increasing the reading of the cold water meter. This problem occurs when large debris or other objects enter the tank. All that is unnecessary interferes with the normal operation of the tank fill valves. It is necessary to disassemble the tank and remove foreign objects from it.
Also, a constant leak in the toilet can cause distortion, loosening of the fastening or breakage of the float. You can repair the float valve without any difficulty yourself:
Image Gallery
Photo from
Before proceeding with the repair of the float valve that controls the water supply to the tank, we shut off the water supply to it
We wash off all the water from the toilet bowl by pressing the dedicated key, button or handle
The screws that attach the valve to the float located around it, unscrew
If necessary, we shift the device holding the toilet bowl float
Remove the membrane or washer from the valve locking mechanism. If they are damaged, change to similar ones.
Using vinegar and a brush, instead of which you can take an old toothbrush, remove the calcium and rust deposits around the float valve
Install the membrane or washer back, assemble the plumbing devices, close the tank with a lid
Check the operation of the repaired float valve. If everything is in order, proceed to operation
Step 1: Turn off the water supply to the tank
Step 2: Flush all water from the plumbing tank
Step 3: Unscrew the fasteners around the valve
Step 4: Float Holder Offset
Step 5: Remove Washer or Valve Diaphragm
Step 6: Removing Sludge Around the Float Valve
Step 7: Reinstall Washer or Diaphragm
Step 8: Check Float Valve Operation
In the case when the float is all right, you need to check the condition of other plastic parts of the valve - the rod, diaphragm lever or the spokes of the float.
Problem number 3. When you press the flush button, nothing happens. Here it is necessary to check the presence of gaps in those places where they should not be - at the joints. Also, plastic fittings may be broken, which is especially common in low-cost models that have served for more than 3 years.
A frequent reason for the violation of the water supply to the tank is the inappropriate length of the drain and filler pipes or their damage. In the fight against the situation, we carry out the following steps:
Image Gallery
Photo from
Step 1: Check the position of the overflow pipe
Step 2: Checking the condition and length of the filler pipe
Step 3: Cutting a new filler pipe to replace
Step 4: Reinstall the new handset
Problem number 4. Another trouble that arises with the toilet bowl is leaks at the threaded connections. To eliminate this trouble, you will need to replace the gasket. If this part has not yet had time to wear out, then you need to check whether the nuts are tightened tightly and if there are any skews.
Problem number 5. The situation when the drain occurs, but its pressure is weak, is also a fairly common phenomenon. This indicates a violation of the flush due to a rubber hose falling into the outlet or some other foreign objects.
The option of using a double button for flushing is very convenient - you can select the desired volume of working fluid for flushing at a particular time
If a leak is detected in the area of the flush valve, we perform the following actions:
Image Gallery
Photo from
We collect leaked water on the floor and covered with rags. Turn off the water supply to the tank and add salt from it.
Acting with an adjustable wrench, weaken the nut that holds the supply pipe to the tank
Weaken the nuts securing the flush tank on the toilet shelf. Unscrew the bottom with pliers, holding the bolt from the top with a slotted screwdriver
We remove the tank, remove the flush valve from it and lay it upside down on rags previously laid on the floor
Unscrew the lock nut fixed on the outside of the tank bottom
From a plastic pipe with a diameter equal to the flush pipe, cut off an equal length segment. The new tube should be 1 cm below the top edge of the tank
Having treated the washer with a sealant at the bottom of the flush valve, push it into the hole and remove the excess sealing compound
We install a new gasket under the locknut, tighten it. Then turn the tank over and put it on the seat. We fix it, open the water and check the action of the drain device
Step 1: Complete removal of water from the flush tank
Step 2: Loosen the flow tube mounting nut
Step 3: Loosen the nuts holding the flush tank
Step 4: Separate the flush tank from the toilet
Step 5: Unscrew the lock nut from the bottom of the tank
Step 6: Cutting A New Flushing Tube
Step 7: Installing a New Drain Valve
Step 8: Reinstall the Flushing Tank
If a serious repair is required with the replacement of many parts, it will be easier and cheaper to install a new drain mechanism with the subsequent adjustment of the fittings.
You should also take responsibility for its purchase - buy a new one in a company store or pick up a suitable model from another manufacturer. It is important to consider the diameter and location of the eyeliner on your toilet.
The pressure during flushing should be appropriate to ensure sufficient washing of the walls of the toilet bowl and timely removal of sewage
How to get and rinse or replace the fittings of the tank built into the wall is shown in the video clip:
About the device and assembly of fittings installed in the toilet bowl is described in the video clip:
A clear and useful video clip about repairing the toilet drain unit:
Having studied the external device of the drain tank, you can not be afraid of unpleasant surprises. If the tank suddenly stops collecting or water flows continuously, you can try to deal with the problem on your own by examining the fittings and disassembling the corresponding working unit.
If the plumber will deal with the breakdown, then it will be much easier to accept the results of his work.
Share with your readers your experience in repairing drain tank fittings. Please leave comments on the article, participate in discussions and ask questions of your interest. The feedback form is located below.