The decorative panel under the bathroom gives the bathroom a finished look. For its design, you can choose a plastic or acrylic design. However, they will cost a lot, especially if the bowl has a non-standard shape.
It will be cheaper to build this screen yourself from tiles, which are glued to a specially prepared frame. In addition to financial benefits, this decor option will fit perfectly into the interior of the room - they try to choose ceramic finishes in accordance with the walls and floor.
We will figure out how to make a screen for a bathtub - we will describe how to equip the base for tiles and the technology of facing work. We supplemented the information with visual photo instructions and video clips that will help you independently perform all the finishing processes.
Why make a screen under the bathroom?
The walls and floor in the bathroom are tiled, and the plumbing is installed in its place and connected to communications. Everything looks great. The only problem that spoils the view is the space under the bathroom from its side down.
To make the interior of the room look harmonious and complete, you must somehow close the bathhouse itself and the pipes connected to it.
The main task of the decorative screen under the bath is to close the eyes of the owners of unpresentable looking legs and the outer side of the bath
If plumbing for bathing is made of acrylic or plastic, then in most cases it looks quite decent from the outside. And cast iron or steel products, on the contrary, are not pleasing to the eye. They must be decorated outside, otherwise the bathroom will not look too neat.
Often, housewives store detergents and other goods necessary for everyday life under the bath. All this, like communications, is desirable to close with a decorative screen.
Such a screen is a great way to hide the superfluous and not too beautiful in appearance. All these jars, phials, rags and pipelines will be behind it reliably hidden from the eyes of people.
If the bathroom is tiled, then the screen under the bath is recommended to be made also from it. So the design of this room can be issued in a single completed style.
The main thing when installing this decor is not to forget about the need to have access to communications. The screen will need to make a hatch through which in case of leaks it will be possible to get to the pipes for their repair.
Possible design options
Bathtubs vary in form, material of manufacture and functionality. But the methods of designing the space under them using tiles are the same in all cases. It is necessary to make a reliable foundation for the tile, and then stick it in accordance with all the rules and wipe the seams.
When arranging a decorative partition, you need to remember the need for a niche for the legs, and also do not forget about the hatch, which facilitates access to sewer pipes
Structurally, screens under the bathroom can be:
- with hinged or sliding doors;
- removable or capital;
- with retractable drawers, designs with or without shelves;
- deaf and with a niche below the legs.
The easiest way to lay tiles - under the side of the bath. When using it, you don’t have to spend energy on carefully aligning the new edge.
It is enough to lay the top row of tiles under the side of the bathhouse or flush with it vertically. An additional plus - the frame and the rough surface for ceramic stickers in this case, will also be made easier than ever.
If it was decided to use ceramic tiles for facing a niche under the bathroom, then the easiest way is to make a blank solid screen out of it without any frills. However, with blockages and leaks, it will not allow you to get to the communications. It will be necessary to break it, and then re-decorate everything. It is difficult to call such a decision thoughtful.
The deaf tiled screen is simply mounted and looks elegant, but if the bath siphon is clogged or the pipes break under it, this decor will have to be broken without the possibility of restoring
A more practical option with a revision door or window. With the device of such a screen, a technological hole is provided, closed with a plastic hatch or a removable panel the size of one tile. It turns out both presentable and practical.
It is extremely difficult to make screens with sliding or swinging sashes out of tiles. The tile must be glued to a solid and skew-free base. And in the case of opening and closing door leafs, this is impossible to achieve. Tiles will inevitably fall off such a surface.
The bath is often used for bathing babies and washing clothes. At the same time, standing next to her is close. If a niche is not made on the floor or the screen does not have a downward slant inward from the edge of the bowl, then there will be nowhere to put your feet in this situation.
Standing next, you have to bend deeper, unnecessarily straining your back. When decorating the bath, it is imperative to provide a recess for the feet.
Choosing ceramics for a bathtub panel
Ceramic tiles with glaze are immune to moisture and durable. It is easy to maintain and install. Its only drawback is the fragility of the glazed layer; upon impact it is easily cracked. But if you do not throw heavy objects in the tile, then this problem is not so urgent and significant.
Marking on the box allows you to quickly navigate the range of ceramic tiles, for a screen in the bathroom it will be enough cheap wall and not frost-resistant
The dimensions of most bathtubs are modest. Tiles for decorating the space below them are recommended to choose a small or medium size. Large plates will have to be cut, and these are excess residues and potential losses from cracking of the glaze when inaccurate cutting.
You can also use mosaics to clad the screen. However, laying out a pattern of small elements is long and laborious. It is easier to choose ready-made mosaic modules in the form of sheets from a fiberglass mesh with ceramics already glued to it. They will just need to be cut and fixed on a partition made of drywall or brick.
Forming a base for a tile
Tile under the bathroom can be glued to a wall made of drywall, brick or tongue-and-groove plates. All three options are acceptable.
But the brickwork will weigh a lot, so it should be used only as a last resort. It is better to avoid excessive load on the bathroom floor from a brick partition with a length of one and a half and a height of about half a meter.
Method # 1: Plasterboard sheets on a frame
The rough base for the tiles quickly and easily enough to make using drywall. To do this, you need to build a frame of bars or a metal profile of the desired configuration, and then sheathe it with plasterboard plates. Moreover, if wood is selected for the assembly of the frame, then it must be impregnated with antiseptics.
The main thing - drywall for installation in the bathroom should be taken exclusively moisture resistant grades (GKLV) with a green shade surface. This material does not rot and mold does not form on it. It is strong, durable and will not swell from water falling on it.
It is categorically not recommended to use ordinary GCR or wood-pressed boards without lamination in a bathroom with its constant humidity.
The frame for drywall can be made of 40x40 mm wooden blocks, but in the bathroom it is still better to make it from a more moisture-resistant metal profile
The basis for tiling is done as follows:
- Markup. Mark the lines around the perimeter of the bath on the walls and floor flush with its side.
- Frame mounting. A frame is assembled from metal profiles. The frame is installed on all sides of the bath, designed for decoration. The structure is leveled and fixed with dowels to the floor and walls.
- Drywall Cutting. The sheets are cut taking into account the gaps in a centimeter near the floor and the side of the bath, which will then be filled with sealant.
- GKL mount. Drywall sheets are attached to the frame with self-tapping screws in increments of 10-15 cm.
- Hatch preparation. At the audit site, a hole for the hatch is made of plastic.
- Seam processing. The joints between the GKL canvases and the walls are glued with a serpentine. Seams around the perimeter of the drywall construction are coated with sealant, and the surface of the sheets is covered with an acrylic primer.
It is not necessary to tighten the screws when fixing the GCR, this can lead to destruction of the sheet in the place of their screwing. And fasteners must be chosen short so as not to accidentally damage the sides of the bath.
The inspection hatch will be installed after the sticker of the tile at the final design of the screen under the bath. For its fixation, ordinary liquid nails are enough.
To make the screen under the bathtub beautiful and even, you need to pay special attention to the layout, the corner stand must be strictly at the angle of the bowl
When mounting the frame, you can use mounting foam. It will stick to the outer side of the bathtub, drywall and profile or bars, thereby combining them into a single structure. It is only necessary to make sure that it does not squeeze out the individual elements of the partition formed under the bath, otherwise the screen will turn out to be curved.
And here is a variant of the frame with subsequent cladding without mounting on dowels. Instead, a plumbing sealant was used to fix the profile. The following materials will be required for work:
Image Gallery
Photo from
Plumbing sealant with a "gun"
Metal profile and guides
Self-tapping screws for fastening GVL to a metal frame
Sized gypsum sheets
Having prepared all the materials and tools in advance, you can begin to work. First, we make the markup, then we establish the basis for the frame, the frame itself and lay the tiles.
Image Gallery
Photo from
Step 1 - marking work
Step 2 - cutting a metal profile
Step 3 - sticking the guide to the floor
Step 5 - Foam Fixing
Step 6 - installation of gypsum sheets
Step 7 - preparing the adhesive solution
Step 8 - Gluing Tiles
Do not forget about the hole for the technical hatch - it will come in handy when you need to eliminate blockage or change drain details.
Often, the supporting frame for the bathroom, erected during the installation of plumbing, serves as the basis for fastening sheets of drywall.
Method # 2: Bricklaying
A beautiful and durable tiled screen can be made in the form of a small brickwork. To do this, in addition to bricks, you will need a solution at the rate of 1 part of M-200 cement for 6 parts of sand and working skills as a bricklayer.
Such a partition is intended solely for gluing tiles; it is unacceptable to use it as a supporting stand for a bathtub. To do this, there are special legs and mounting frames. Moreover, between the upper bricks and the bowl of the bath should remain a gap of 2-3 cm to fill the mounting foam.
The masonry should be made as narrow as possible from the brick placed on the edge, its strength for gluing with tiles is quite enough and the floor load can be minimized
Laying the first row, it will be necessary to take out two or three bricks in the middle of the bath to form a niche for the legs in this place later on. And also do not forget about the opening for installing the inspection hatch.
After the masonry is completed and the mortar hardens, the resulting partition will still need to be smoothed with plaster so that it can already be glued onto it.
It will only be possible to start ceramic cladding in two to three days. This time should be enough so that the solution finally sets and dries, and the septum passes the stage of shrinkage deformation. If the tile starts to be glued immediately, then after a couple of days it can simply fall off due to an imperceptible masonry displacement.
Photo-installation instructions for the screen for an acrylic corner bath. The mosaic was chosen as the facing material - it best fits on curved surfaces.
Image Gallery
Photo from
Stage 1 - masonry
Stage 2 - stucco brickwork
Stage 3 - Mosaic Tiling
Brick creates a foundation that does not deform over time and requires little repair.
Method # 3: Partition from tongue-and-groove plates
Instead of brick, the base for tiles can also be made of tongue-and-groove plates. It can be gypsum moisture resistant or silicate products. Both options can be used in bathrooms.
They are produced according to the standard with a minimum width of 80 mm, which makes it easy to create a solid supporting structure for tiles under the rim of almost any bathtub.
The tongue-and-groove plates are easily cut with a conventional hacksaw on wood, of which under the bathtub an excellent partition is obtained for subsequent tiling
The plates are connected to each other using special glue or gypsum plaster. The presence of grooves and ridges along the edge of the product greatly simplifies masonry.
To bind the partitions to the bathroom wall, metal staples and dowels are used. The result should be a flat surface, completely ready for gluing ceramic tiles.
Tile bonding nuances
The finishing lining of the partition formed under the bathroom is done using tile glue or liquid nails. The first option is applied to the back of the tile with a notched trowel, and the second - from the tube with several points around the perimeter and in its center.
The first tile is pasted in one of the upper corners and leveled using a level, the rest will be already attached to it
So that the tiles do not float to the sides, plastic crosses are inserted between them, allowing you to precisely control the size of the tile joints. The latter, after finishing the lining, must be grouted. Otherwise, water will pass through them under the ceramics, which sooner or later will lead to its decay.
Removable screen construction
In addition to rigidly fixed structures, to decorate the space under the bathroom, make a removable panel.
To create a mobile screen you will need:
- OSB;
- tile;
- furniture legs adjustable in height;
- slats 20x40 mm to create a frame for supports.
First, a piece with such dimensions is cut off from the OSB sheet to completely close the side of the bath. Only in height do they make it slightly smaller, by five centimeters. The feet should be able to freely enter into this gap from below. After cutting, the frame is filled on the OSB, and the legs are already attached to it.
The basis of the removable screen for a tile bathtub is made of oriented particle boards, which, thanks to their internal structure, are durable and resistant to moisture
The tile on the wood base is glued according to standard technology using sealants and grout mixtures. After grouting the resulting screen, you can put it on the bathtub and adjust the legs so that it stands in its place evenly.
By twisting the supports, its upper edge must be pressed down to the side of the bathhouse, then this decorative panel will stand still.
Facing bathtubs of complex shape
If the swimming pool has curved contours, then a regular screen with tiles on it cannot be installed. The basis of drywall can be made of any shape. But then gluing large ceramic tiles to it is unlikely to succeed. Ceramics do not bend, it can only be broken.
However, a screen of complex configuration with arched outlines is quite possible to veneer using mosaics. Her small pieces are perfect for this purpose.She is not afraid of moisture and will serve in the bathroom for more than one year.
Mosaic can be pasted over the bath with any contours, it allows you to easily repeat all its bends and bulges
For cladding a bathtub or a jacuzzi, a mosaic in the form of separate pieces, as well as ready-made modules on a flexible grid, are suitable. The first method is laborious and long. It is much easier to use modules with mosaic elements already pasted under a given pattern. With their help, it will be easy to repeat the contour of the bowl.
In addition to tiling, there are various options for decorating the space under the bathroom. One of the original ways is a mirror screen. Alternative methods for creating a screen and technologies for their implementation are described in this article.
How to make a bathtub holder for an acrylic bath:
Installation of a decorative screen with tiles for a swimming pool:
The nuances of creating a frame for gypsum board based cladding:
If the appearance of the bath is not pleasing to the eye, then it can always be covered with a decorative screen. In a situation where the entire bathroom is tiled, it is also recommended to use it for decorating the bowl of the bath.
The basis for the tile is easiest to make drywall, but options are possible from brick or tongue-and-groove plates. The device of such a decor is not something complicated, you can do it yourself.
Share with your readers your experience and interesting ideas for creating a screen under the bathtub. Please leave comments on the article and ask your questions. The feedback form is located below.